9
Multi-stage cooking
1. Select the desired power level by pressing the
POWER LEVEL Selector pad or DEFROST pad.
Result : The selected power level will be
displayed in the display window.
2. Set the desired heating time by pressing the
NUMBER pads.
Result : The selected time is displayed in the
display window.
The maximum time according to each cooking power level can be referred
to in the title “Power Levels and Time Variations” on page 9. The NUMBER
pads will not operate or respond when you press a cooking time exceeding
the maximum value. It is not possible to set a cooking time for longer than
the maximum time allowed on the chosen program. It is advisable to press
CANCEL and to enter a new power level and cooking time.
3. Repeat steps 1 and 2 for I or II stage memory programming.
4. Press the button.
Result : The oven lamp and cooling fan will be
turned
on. The oven will automatically start heating
according to pre-programed cooking time and
power level.(I stage g II stage).
The time on digital display will count down.
You can not set up the same POWER LEVEL or DEFROST.
It operates as setting up sequence.
POWER LEVELS AND TIME VARIATIONS
The power level function enables you to adapt the amount of energy
dissipated and thus the time required to cook or reheat your food,
according to its type and quantity. You can choose between the power
levels below.
Power level
MJ26A6093 MJ26A6053
Percentage Output Percentage Output
HIGH ( )
100 % 1850 W 100 % 1500 W
MEDIUM ( )
70 % 1295 W 70 % 1050 W
LOW ( )
50 % 925 W 50 % 750 W
HIGH DEFROST ( )
20 % 370 W 25 % 375 W
LOW DEFROST (
)
10 % 185 W 13 % 195 W
The cooking times given in recipes and in this booklet correspond to
the specific power level indicated.
Power level Max. Time
HIGH ( ) 25 mins
MEDIUM ( ) 40 mins
LOW ( ) 40 mins
HIGH DEFROST ( )
50 mins
LOW DEFROST (
)
50 mins
To Next Page
Loading...
