Samsung CP1370 - Oven Error Codes

62_ troubleshooting and error code
Electronic interference causes display to be reset.
• Disconnectthepowerplugandreconnectit.Resetthetime.
Condensation appears inside the oven.
• Thisisanormaloccurrence.Simplywipeawayaftercooking.
The fan continues to operate after the oven has been turned off.
• Thisisanormaloccurrence.Coolingfanmaycontinuetooperateforupto
three minutes after oven has been turned off.
Air flow is detected around the door and outer casing.
• Thisisanormaloccurrence.
Light reflection around the door and outer casing.
• Thisisanormaloccurrence.
Steam escapes from around the door or vents.
• Thisisanormaloccurrence.
A clicking sound occurs while the oven is operating, especially
in defrosting mode.
• Thisisanormaloccurrence.
ERROR CODES
Error Code General Functions
TEMP SENSOR OPEN
In case the value of the temperature sensor is more than 250
°C during operation / cancellation.
TEMP SENSOR SHORT
In case the value of the temperature sensor is less than 5 °C
during operation / cancellation.
OVER 230 °C DURING OPERATION OF MWO MODE
In case the temperature rises over 230 °C during operation of
mwo mode (fire sensed).
DAMPER S/W
In case it fails to sense the DAMPER to open or close for 1
minutes.
CP1370-B_XTL-03749V-01_EN.indb 62 21/12/2010 19:21:44