English - 11
Storing Channels Automatically
You can scan for the frequency ranges available to you (availability depends on your
country). Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. However you can sort numbers manually and clear
any channels you do not wish to watch.
1 Press the MENU ( ) button to display the menu.
2 Press the ▲ or ▼ button to select
Channel
, then press the ENTER ( )
button.
3 Press the ENTER ( ) button again.
4 Press the ENTER ( ) button again.
The available areas are listed.
5 Select your area by pressing the ▲ or ▼ button, then press the ENTER
( ) button.
6 Press the ▲ or ▼ button to select
Search
, then press the ENTER ( )
button.
7 Press the ENTER ( ) button again to start the search.
The search will end automatically.
➢
To stop the search before it has finished, press the MENU ( ) or the
ENTER ( ) button.
8 When searching and storing are completed, the
Sort
menu is displayed.
◆ To sort the stored channels into the desired numerical order, go to step 4
of the “Sorting the Stored Channels” procedure on page 13
◆ To exit from the channel store function without sorting the channels,
press the
MENU ( ) button repeatedly until the menus disappear.
Channel Control
Channel
Auto Store
Manual Store
Channel Manager
Sort
Name
More
Move Enter Return
T V
Auto Store
Area :
Asia/W.Europe
Search
Move Enter Return
T V
Sort
From : P 1
To : P--
Store : ?
Move Adjust Return
T V
Stop
Search
Enter Return
P 1 C – –
87 MHz
10%
To Next Page
Loading...
