OPERATION
3.11 CHAPTER THREE: TV OPERATION
Viewing a VCR or Camcorder Tape
You must select the appropriate mode in order to view the VCR or Camcorder signal
on the TV.
1
Press the MENU button to
display the menu.
Press the CH ▼ button
twice to select
“Channel”, then press the
VOL+ button.
2
Press the CH ▼ button
twice to select “TV/AV”.
3
Press the VOL+ or VOL-
button.
You will switch between
viewing the signals com-
ing from equipment con-
nected to the TV’s A/V
jacks, and the TV signal.
4
Press the MENU button
twice to exit.
Quick way to view the external
signal: Simply press the TV/VIDEO
button on the remote control.
▼
To Next Page
Loading...
