22
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color Tone, Contrast, Brightness, Sharpness, Color, Tint
(NTSC only)
1 Press the MENU button.
Result:
The
Picture
menu is displayed.
2 Press the œ or √ button.
3 Press the ▲ or ▼ button to select the
Adjust
, and then press the œ
or √ button.
Result:
When select the
Mode
to
Custom
, the
Adjust
menu is
displayed.
4 To adjust the... Press the...
◆ Color Tone ◆ œ or √ button.
Result: You select the required option
(
Normal
,
Warm1/2
,
Cool1/2
).
◆ Contrast ◆ œ or √ button.
◆ Brightness Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
➣
The
Sharpness
and
Tint
are not available in DVD mode.
5 When you are satisfied with the settings, press the EXIT ()button
or, press the MENU ()button repeatedly to return to normal
viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “ ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 36).
➣
If you make any changes to the Adjust settings, the picture
standard is automatically switched to
Custom.
Picture
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Picture
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Picture
Mode
œœ
Custom √
Adjust √
Digital NR : Off
Tilt : 0
Contrast 91
To Next Page
Loading...
Need help?
General