CHANGING THE INTERIOR LIGHTS
14
WARNING
INTERIOR LIGHT IN THE FRIDGE
INTERIOR LIGHT IN THE FREEZER
Before changing the interior lights, unplug the refrigerator from the power supply. If you
have difficulty in changing the lights, contact your service center.
•
Light bulbs may be hot.
CAUTION
NOTE
•
Replacement bulbs for the fridge and freezer are available at most major retail outlets.
•
Use replacement bulb size A15, maximum 40 watts.
Place a flat screwdriver under
the light cover hooks and
remove it by pushing
and lifting in the
direction of the arrow.
The freezer light is located in the bottom of the auger motor case.
After changing the bulb, reattach
the light cover.
A15
40W
NOTE
Use a screwdriver to remove
the light cover (
➀
).
Replace the bulb with a new
one (
➁
)
Reattach the light cover.
•
Replacement bulbs for the fridge and freezer are available at most major retail outlets.
•
Use replacement bulb size A15, maximum 40 watts.
A15
40W
DA99-01473B(EN)-0.2 10/20/07 11:02 AM Page 14
To Next Page
Loading...
Need help?
General
