82
ID Settings
HOME → ID Settings → ENTER E
ID Settings
-
The displayed image may differ depending on the model.
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
―
Press u/d to select a number, and press E.
―
Enter the number you want using the number buttons on the remote control.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
•
RS232C cable
Communicate with MDC via the RS232C-stereo cable.
•
RJ45(LAN) cable
Communicate with MDC via the RJ45 cable.
Device ID Auto Set
―
Assign ID number automatically for all connected products.
To Next Page
Loading...
