SETTING UP THE SHOOTING FUNCTION
Selecting the number of continuous shots
Select the desired number by pressing the UP ( ) /
DOWN ( ) buttons.
Press the OK button.
10. Press the MENU button to cancel menu display.
CONTINUOUS SHOT
CANCEL : SET : OK
002
# OF SHOTS
Reference
When [CONTINUOUS] is selected, the flash will automatically be cancelled.
Once a continuous sequence has begun, it will continue until the selected number of shots
has been taken. Releasing the shutter button will not interrupt this funtion.
The maximum number of shots in a sequence is governed by the image settings.
Using a 16/32MB CF CARD, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance)
These figures are approximate as image capacities can be affected by variables such as
card performance and subject matter.
SUPER FINE FINE NORMAL
2048X1536 5 10 15
2048X1360 5 10 16
1024X768 19 39 60
512X384 79 100 100
To Next Page
Loading...
