Samsung DIGIMAX 350SE - Playback Controls via Camera Buttons

ADVANCED
SETTING UP PLAY BACK FUNCTIONS
Setting up play back function by using the camera button
THUMBNAIL / ZOOM W button
You can view up to 9 images at a time by using the THUMBNAIL function.
1. Turn the camera on.
2. Rotate the mode dial to PLAY mode.
3. An image displays on the LCD monitor.
4. Press the THUMBNAIL button.
The thumbnail display will highlight the image that had been showing at the time the
thumbnail mode was selected.
5. Press the
/ / / buttons to move to desired image. Selected image is highlighted.
Icons are displayed to indicate the type of file selected.
- : Movie clip file
- : DPOF indicator
- : Sound recorded file
- : Image protect indicator
6. When viewing a thumbnail image, press the zoom T button and the selected shot will show
in single display mode.
Press the
THUMBNAIL button
[ Single display mode ]
Highlighted image
(selected image)
[ Thumbnail display mode ]
The PLAY mode can be set using the camera button.