SETTING UP CAMERA SYSTEM
DATE SETUP
This alters the time and date stored with the images.
Range: 2001 ~ 2050 year (leap years and months are corrected automatically).
The default is 2002/03/01 00:00.
1. Turn the camera on.
2. Rotate the mode dial to SET UP mode( ).
3. [SETUP 1/3] menu will be displayed on the LCD monitor.
4. Select [SETUP 2/3] menu by pressing the LEFT (
) /
RIGHT ( ) buttons.
5. Press the DOWN button ( ) and select [DATE
SETUP].
6. Shift the cursor to the [DATE SETUP] sub menu by
pressing the RIGHT button ( )
7. Press / / / to select correct time.
8. Press OK button to confirm the setting.
SETUP 2/3
BACK : SET : OK
2002/03/01
00:00
DATE SETUP
IMPRINT
DATE TYPE
USER SET
Note
If the battery is removed, the date and time settings will remain for approximately 1 hour.
If the batteries are removed for a period longer than one hour, it may be necessary to reset
the time /date.
To Next Page
Loading...
