SETTING UP CAMERA SYSTEM
DATE TYPE
You can select date type that is imprinted on the image.
- YYYY/MM/DD : year /month/ day
- DD/MM/YYYY : day /month /year
- MM/DD/YYYY : month/ day /year
1. Turn the camera on.
2. Rotate the mode dial to SET UP mode ( ).
3. [SETUP 1/3] menu will show on the LCD monitor.
4. Select [SETUP 2/3] menu by pressing the LEFT ( ) /
RIGHT ( ) buttons.
5. Press the DOWN button ( ) and select [DATE TYPE].
6. Shift the cursor to the [DATE TYPE] sub menu by
pressing the RIGHT button ( )
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is YYYY/MM/DD.
8. After selecting the desired sub menu, press the OK button to confirm the setting.
SETUP 2/3
BACK : SET : OK
YYYY/MM/DD
DD/MM/YYYY
MM/DD/YYYY
DATE SETUP
IMPRINT
DATE TYPE
USER SET
Reference
Date will be imprinted as DATE TYPE setting.
TIME is imprinted in the following way: [hour / minute / second].
Hours are shown using the 24 hour clock.
The IMPRINT function is unaffected by the camera being switched on and off.
To Next Page
Loading...
