79
Setting up the application software
16. To apply changes, you must restart the
computer. Select [Yes, I want to restart
my computer now], and then click [OK].
17. After restarting the computer, connect the PC to the camera with the USB cable.
19. If you can see [Removable Disk] under
[My computer], the camera driver
installation was successful.
Now you can transfer image files from the
camera to PC via the USB cable.
[Click!]
18. Turn the camera power on. [Found New
Hardware Wizard] will open and the
computer will recognize the camera.
If you have ever installed an image viewer
program or your OS is Windows XP, an
image viewer program will open.
If the image viewer program opens, the
camera driver was setup successfully.
To Next Page
Loading...
