Samsung DIGIMAX A402 - Start up Sound

《78》
Start up sound
■ You can select the sound that is activated whenever the
camera is turned on.
● Setting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.BEEP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [OFF] is selected : Start up sound will not be activated whenever the camera is turned
on.
If [ON] is selected : Start up sound will be activated whenever the camera is turned on.
5. Press the menu button twice and the menu will disappear.
2048
◀▶
MYCAM
S.IMAGE
S.BEEP
OFF
ON
BACK:
◀
SET:OK