Samsung DIGIMAX A50 - LCD brightness; Adjusting LCD Brightness; Quick view; Setting Quick View

ŝ90Ş
LCD brightness
ƃAdjusting LCD Brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[LCD] sub menu : DARK, NORMAL, BRIGHT
5. Press the menu button twice and the menu will disappear.
ƈYou can adjust the LCD brightness.
AF LAMP
SOUND
LCD
VIDEO
Q.VIEW
DARK
NORMAL
BRIGHT
SETUP
BACK: SET:OK
ƈIf you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is
possible only with still images.
ƃSetting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF] : The quick view function can’t be activated.
[0.5, 1, 3SEC] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
SOUND
LCD
VIDEO
Q.VIEW
RESET
OFF
0.5 SEC
1 SEC
3 SEC
SETUP
BACK: SET:OK
Quick view