Samsung DIGIMAX I50 - Special Effect: Photo Frame

《59》
Special Effect : Photo Frame
■ You can add 9 types of frame-like borders to a still image you want to capture.
■ Date & Time information will not be printed on the stored image taken with [Photo Frame]
menu.
1. Select the MANUAL mode, and press the menu button.
2. Press the LEFT/ RIGHT button and select the
[Special Effect] menu tab.
3. Select the [Photo Frame] menu by pressing the UP/ DOWN
button and press the Right button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [Off] : The photo frame will not be added.
5. Press the menu button twice and the menu will disappear.
If you select the [Frame 1 ~ 9] menu, the selected photo
frame will appear.
※ Before taking a picture, you can change the frame type by
pressing the +/- button. Change the frame type by
pressing the Up/ Down/ Left/ Right button.
[Frame 1] [Frame 2] [Frame 3]
[Frame 4] [Frame 5] [Frame 6]
[Frame 7] [Frame 8] [Frame 9]
HighLight
Composite
Photo Frame
Off
Frame1
Frame2
Frame3
Frame4
Special Effect
Back:◀ Set:OK
Capture:SH Frame:+/-