Samsung DIGIMAX S700 - Setup Menu - Basic Settings; Auto Power Off, Formatting, Date;Time Setup

55
Ⅳ.ADJUSTMENT
PROGRAM
<1>PROCESS CODE ;
<2>65535 ;
<3>PROCESS CODE ;
<4>0 OR 1 ;
<5>0 OR 1 ;
<6>CONDITION ;
<7>SPEC ;
<8>NOT
<9>NOT
<10>NOT
<11>NOT
<12>NOT
<13>NOT
<14>0
<15>0
e... Turn on the camera.
f...<Figure 2-1> will be displayed on the TFT LCD and the adjustment will be done automatically.
e...After completing the upgrade, the camera is turned off
automatically.
※If the adjustment is incomplete, <Figure 2-2> will display. In this
case, re-try the adjustment process.
< Description of TXT file >
When making or modifying the program, see the following program codes.
When modify the program, use the Memo Pad of Windows and save it as “STS2_73ADJ.txt”.
<Figure 2-1>
<Figure 2-2>
Description of codes
<1>8;
<2>65535;
<3>8,0;Lens Shading
<4>1,1;write E2P,SD
<5>1,3,100,1;Repeat, NG Repeat, LUT
percentage,BEFORE CAP SKIP(0:SKIP)
<6>60,200;Min,Max
<7>;
<8>;
<9>;
<10>;
<12>;
<13>;
<14>65535;
<15>0;