56
Ⅳ.ADJUSTMENT
3) B/T LEVEL ADJ
After changing the MAIN PCB, adjust WARNING LEVEL and LOCK LEVEL.
Required Equipment : POWER SUPPLY(2.71V)
<How to adjust>
a...Prepare the POWER..SUPPLY.
b...Connect the camera to the POWER..SUPPLY.
c...Set the voltage to 2.71V.
d...Downloading the program file and save it to SD memory card.
e...Insert the SD memory card and turn on the camera.
f... The adjustment will be done automatically. There are no displays on the LCD.
g... After completing the upgrade, the camera is turned off automatically.
To Next Page
Loading...
