ŝ64Ş
Before contacting a service centre
Camera does not take images when pressing the Shutter button
ҮThere is insufficient memory capacity
ƍ Delete unnecessary image files
ҮThe memory card has not been formatted
ƍ Format the memory card (p.57)
ҮThe memory card is exhausted
ƍ Insert a new memory card
ҮThe memory card is locked
ƍ Refer to [Card Locked!] error message
ҮThe camera’s power is off
ƍ Turn the camera power on
ҮThe battery is exhausted
ƍ Insert fresh batteries.
ҮBattery is inserted incorrectly with the polarities reversed
ƍ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ҮThe camera stopped due to a malfunction
ƍ Remove /re-insert battery and switch the camera on
The images are unclear
ҮA picture was taken without setting an appropriate macro mode
ƍ Select an appropriate macro mode to take a clear image.
ҮThe picture was taken with the subject beyond the flash range
ƍ Take a picture within the flash range
ҮThe lens is smudged or dirty
ƍ Clean the lens
The flash does not fire
ҮFlash off mode has been selected
ƍ Dis-engage flash off mode
ҮThe camera mode can’t use the flash
ƍ Refer to the FLASH instruction (p.22)
Incorrect date and time is displayed
ҮThe date and time have been set incorrectly or the camera has adopted the
default settings
ƍ Reset the date and time correctly
The camera buttons do not operate
ҮCamera malfunction
ƍ Remove /re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ҮIncorrect memory card format
ƍ Re-format the memory card
The images don't play back
ҮIncorrect file name (Violation of DCF format)
ƍ Do not change the image file name
Colour of image is different to the original scene
ҮWhite balance or effect setting is incorrect
ƍ Select appropriate White balance and effect
Images are too bright
ҮExposure is excessive
ƍ Reset exposure compensation
To Next Page
Loading...
