《14》
Connecting to a Power Source
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification for
the camera. Failure to do so may affect your warranty.
DANGER
If you have access to a mains supply, using an AC
Adapter (SAC-32, DC 3.3V 2.0A) allows the camera
to be used for long periods of time. Plug the adapter
into the connection point (DC IN 3.3V) on the
camera. Remove the batteries from the camera
when using an AC adapter.
Using the AC power adapter (SAC-32, DC 3.3V 2.0A, optional)
To Next Page
Loading...
