■ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
● Setting RGB Values
1. Press the +/- button, and then use the UP and DOWN
buttons to select the RGB icon ( ).
The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/Down Button: Navigates between R, G, and B
icons.
- Left/Right Button: Changes value of each icon.
3. When you press the +/- button again, the value you set will be saved and RGB setup
mode will end.
■ You can use the +/- button to adjust the values for the RGB, ISO, white balance and
exposure compensation.
Main menu Sub menu Available camera mode
RGB
-2.0~0.0~+2.0(1/3EV steps)Exposure compensation
ISO
WHITE BALANCE
R (Red), G (Green), B (Blue)
AUTO, DAYLIGHT, CLOUDY, FLUORESCENT H,
FLUORESCENT L, TUNGSTEN, CUSTOM.
AUTO, 50, 100, 200, 400
To Next Page
Loading...
