Samsung Digimax V800 - DPOF: Standard; DPOF: Index

《84》
DPOF : Standard
■ This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Standard] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select] : Selection window for an image to print is
displayed.
- Up/Down/Left/Right : Select an image to print.
- Zoom W/T Button : Select the number of prints.
[All Pics] : Configure number of prints for all pictures
except movie and voice files.
- W/T button : Select a number of prints
[Cancel] : Cancel the print setup.
5. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF indicator
( ) will show.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Index] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
DPOF : Index
■ Images (except for movie clips and voice file) are printed as index type.
Standard
Index
Size
Select
All Pics
Cancel
DPOF
Back:◀ Set:OK
Set:OK
W◀ 0 Prints ▶T
W◀ 0 Prints ▶T
Set:OK
Standard
Index
Size
No
Yes
DPOF
Back:◀ Set:OK