Samsung DP700A7K-K01US

Network & Internet
47
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
1
On the desktop, open the Charms and select the Settings
charm
→
Control Panel
→
Network and Internet
→
Network and Sharing Center
→
Change adapter settings .
2
Right-click Ethernet and select Properties .
3
Select Configure…
→
Power Management
→
Allow this
device to wake the computer
→
OK .
4
Restart the computer.
•
If the computer wakes up from sleep mode inadvertently,
disable the Wake on LAN feature.
•
This feature may not work while using other power saving
features. To disable other sleep functions, select the
Settings charm
→
Control Panel
→
Hardware and Sound
and then set
Power Options .
5
Configure the IP settings.
•
When using DHCP, select Obtain an IP address
automatically
.
•
When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select
Use the
following IP address
and set the IP address manually.
6
Select OK to save the settings.