To Next PageTo Next PageWhy are my garments still wrinkled after using the Wrinkle-Care setting on my Samsung DV431AE?
For best results with the Wrinkle-Care setting on your Samsung Dryer, use small loads of 1 to 4 items. Load fewer garments, and load similar-type garments together.
Why is my Samsung DV431AE so noisy?
If your Samsung Dryer is noisy, check the load for objects such as coins, loose buttons, or nails, and remove them. It is normal to hear the dryer gas valve or heating element cycle on and off. Ensure the dryer is leveled properly according to the installation instructions. It's also normal for the dryer to hum due to air moving through the drum and exhaust system.
What to do if my Samsung DV431AE doesn’t run?
If your Samsung Dryer doesn't run, ensure the door is fully latched. Also, check that the power cord is properly plugged into a working electrical outlet and verify the home's circuit breaker and fuses. If the door was opened during the cycle, press the Start/Pause button again.
How to use Wrinkle-Care on Samsung DV431AE?
To get the best results from the Wrinkle-Care option on your Samsung Dryer, use small loads of 1 to 4 items and load similar-type garments.
Why does water drip from the nozzle when Steam-Care starts on my Samsung Dryer?
If water drips from the nozzle when the Steam-Care cycle starts on your Samsung Dryer, this is steam condensation and will stop after a short time.
What does HE error mean on my Samsung Dryer?
If your Samsung Dryer displays an 'HE' error indicating an invalid heating temperature, call for service.
What to do if Samsung DV431AE Dryer dries unevenly?
If your Samsung dryer dries unevenly, it's normal for seams, pockets, and other heavy areas to remain slightly damp. If desired, select the More Dry setting. If drying a single heavy item with lightweight items, the heavy item may not dry completely. For best results, sort heavy items from lightweight items.
What does tE error mean on Samsung DV431AE?
Clean the screen or vent. If the problem continues, call for service.
Why sprayed water is not visible during Steam-Care in Samsung DV431AE Dryer?
Sprayed water is difficult to see when the door is closed.
Why does my Samsung Dryer shut off before load is dry?
If your Samsung Dryer shuts off before the load is dry, the load might be too small or too large. Try adding more items or a few towels if the load is too small, or remove some items if the load is too large, then restart the cycle.
General| Brand | Samsung |
|---|---|
| Model | DV431AE series |
| Type | Electric Dryer |
| Sensor Dry | Yes |
| Steam Drying | No |
| Moisture Sensor | Yes |
| Reversible Door | Yes |
| Lint Filter Indicator | Yes |
| Wrinkle Prevention Option | Yes |
| Control Type | Electronic |
| Voltage | 240V |
| Color | White |
| Amperage | 30 Amps |
