10. Remove the holder-glass.
11. Exchange the positions of:
: The cover-hinge and handle door
: The holder-hinge and guider-
holder glass
12. Remove the Cover-Lever and then
install it on the opposite side.
_ Refer to the illustrations on the
right to aid you in the assembly
process.
........._i!_,i i i i i i ,
_- P"I ® P_I I P"I ® P"I J
13. Remove the cover-hole (P).
14. Assemble the holder glass and then fasten the 14 screws
that you removed in step 9.
15, Attach the cover-hole.
A spare cover hole is in the assy manual.
16. Install the door on the frame-front and then fasten the
4 screws that you removed in step 2.
_ heck the positions of the screws you installed in the hinge
door.
instaling your dryer 23
Fg00ADI<YDV51/FUSEI<MANUAL DCC_80i_ITODEN (_f!fi_j:__ ,__,_-_+i i_[_ _) ndd S_/ 2013 i 25 9:2Cx52
I
To Next Page