To Next Page
C
Clayton LopezSep 12, 2025
What does code 9C1 mean on my Samsung Dryer?
- RRachel Thompson DDSSep 12, 2025
The 9C1 code on your Samsung Dryer indicates that the electronic control needs to be checked. Ensure power is correctly supplied.
What does code 9C1 mean on my Samsung Dryer?
The 9C1 code on your Samsung Dryer indicates that the electronic control needs to be checked. Ensure power is correctly supplied.
What to do if my Samsung DV50K7500E(G Dryer does not dry clothes properly?
If your Samsung Dryer isn't drying clothes effectively, several factors could be the cause. Begin by ensuring the exhaust hood outside your home can open and close without obstruction. Inspect the exhaust system for lint buildup, and ideally, have the ducting professionally cleaned annually. Use a 4” rigid metal exhaust duct for optimal airflow. Avoid overloading the dryer; aim for a 1:1 ratio between wash and dryer loads. Separate heavy and lightweight items for drying. Large, bulky items may need repositioning during the cycle. Confirm that your washing machine is properly draining and extracting sufficient water from the load before transferring clothes to the dryer. If the load is too small, add a few towels to help with tumbling. Clean the lint filter.
Why is my Samsung DV50K7500E(G not heating up?
If your Samsung Dryer isn't heating, start by checking your home's circuit breakers or fuses. Some cycles are designed to run without heat, so double-check your cycle selection. If you have a gas dryer, ensure the gas supply is turned on. Clean both the lint filter and the exhaust duct, as blockages can impact heating performance. Also, the dryer may simply be in the cool-down phase at the end of its cycle.
Why The Samsung Smart Home app is successfully connected to my dryer but does not run?
If the Samsung Smart Home app is connected but not running, try exiting and restarting the app, or unplug your router and reconnect it. Alternatively, remove the Smart Home Adapter and reconnect it properly, then try again.
What does code tC mean on my Samsung Dryer?
The tC code on your Samsung Dryer indicates that the Thermistor1 resistance is very low or high. Check for a clogged lint screen and ensure the vent system is not restricted.
What does tC mean on my Samsung DV50K7500E(G Dryer?
The tC error code on your Samsung dryer indicates that the Thermistor1 resistance is very low or high. Check for a clogged lint screen and ensure the vent system is not restricted. If the code persists, contact a Samsung service center.
Why does water drip from the nozzle when the Steam cycles starts on my Samsung DV50K7500E(G Dryer?
The water dripping from the nozzle during the Steam cycle's start is due to steam condensation. The dripping should stop shortly after the cycle begins.
Why is sprayed water not visible during Steam cycles in my Samsung Dryer?
The sprayed water during the Steam cycles is difficult to see when the door of the Samsung Dryer is closed.
What does tC5 error mean on Samsung Dryer?
The tC5 error code on your Samsung dryer indicates that the Thermistor2 resistance is very low or high. Check for a clogged lint screen and ensure the vent system is not restricted. If the code persists, contact a Samsung service center.
What does the DC code mean on my Samsung Dryer?
The DC code on your Samsung Dryer indicates that the dryer is operating with the door open. Ensure the door is properly closed and that no laundry is caught in the door.
Guidance on understanding and following safety instructions for safe appliance operation.
Essential requirements for proper dryer installation, including electrical and gas connections.
Guidelines for choosing a suitable and safe location for the dryer installation.
Specifications for dryer venting, duct materials, and exhaust airflow efficiency.
Instructions for connecting gas supply and electrical power to the dryer.
Detailed instructions for installing the dryer, including exhaust, gas, and electrical connections.
Procedure to test the dryer's exhaust system for blockages or issues.
Instructions for connecting the dryer to a smartphone app for remote control.
Troubleshooting common dryer issues like not running, not heating, or uneven drying.
General