What does code tC5 mean on my Samsung DV50K7500E Dryer?
The tC5 code on your Samsung Dryer indicates that the Thermistor2 resistance is very low or high. Check for a clogged lint screen and ensure the vent system is not restricted.
What to do if my Samsung DV50K7500E Dryer does not heat?
If your Samsung Dryer isn't heating, first check your home's circuit breakers or fuses. Some cycles don't require heat, so double-check your selected cycle. If you have a gas dryer, ensure the gas supply is turned on. Clean the lint filter and exhaust duct. The dryer might also be in the cool-down phase of the cycle.
Why is my Samsung Dryer not running?
Your Samsung Dryer might not be running due to several reasons. First, ensure that the door is fully latched. Check that the power cord is properly plugged into a working electrical outlet and inspect your home's circuit breakers or fuses. If the door was opened mid-cycle, press START/PAUSE again. Also, a clogged lint filter can prevent the dryer from starting, so make sure it's clean.
What to do if my Samsung DV50K7500E Dryer does not dry clothes properly?
If your Samsung Dryer isn't drying clothes effectively, several factors could be the cause. Begin by ensuring the exhaust hood outside your home can open and close without obstruction. Inspect the exhaust system for lint buildup, and ideally, have the ducting professionally cleaned annually. Use a 4” rigid metal exhaust duct for optimal airflow. Avoid overloading the dryer; aim for a 1:1 ratio between wash and dryer loads. Separate heavy and lightweight items for drying. Large, bulky items may need repositioning during the cycle. Confirm that your washing machine is properly draining and extracting sufficient water from the load before transferring clothes to the dryer. If the load is too small, add a few towels to help with tumbling. Clean the lint filter.
What does code dF mean on my Samsung Dryer?
The dF code on your Samsung Dryer indicates an incorrect door switch.
How to troubleshoot a Samsung DV50K7500E Dryer that does not run?
If your Samsung Dryer isn't running, ensure the door is fully latched shut. Also, verify that the power cord is properly plugged into a working electrical outlet. Check the home's circuit breakers or fuses. If the door was opened mid-cycle, press the START/PAUSE button again. Finally, make sure that the lint filter is clean.
What to do if the Samsung Smart Home app is installed but not connected to my dryer?
To connect the Samsung Smart Home app to your dryer, ensure you are logged into your Samsung account. Verify that your router is functioning correctly and that the Smart Home Adapter is properly inserted. If the Smart Control (Smart Monitor) indicator on the dryer’s display is off, use the Samsung Smart Home app to connect and register the dryer with your home network access point (AP).
What to do if an error message appears when I try to register my Samsung Dryer in the app?
If you encounter an error message while registering your Samsung Dryer, it could be due to the distance from your access point (AP) or electrical interference. Wait a moment and try the connection again.
What to do if Samsung DV50K7500E Dryer does not dry clothes properly?
If your Samsung Dryer isn't drying clothes, check that the exhaust hood outside your home can open and close without any problems. Inspect the exhaust system for any lint buildup and clean the lint filter. It's also recommended to inspect and clean the ducting annually and use a 4” rigid metal exhaust duct. Avoid overloading the dryer, ensuring that one wash load equals one dryer load. Separate heavy and lightweight items, and reposition large, bulky items for even drying. Ensure your washer is draining properly. If the load is too small, add a few towels; if it's too large, remove some items.
What does the DC code mean on my Samsung DV50K7500E?
The DC code on your Samsung Dryer indicates that the dryer is operating with the door open. Ensure the door is properly closed and that no laundry is caught in the door.
To Next Page
General