installing your dryer
TOOLS NEEDED FOR INSTALLATION
Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup,
adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer you are
responsible.
Make sure you have everything necessary for proper installation.
1. A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements on page 11.
2. A POWER CORD for electric dryers (except Canada).
3. EXHAUST SYSTEM – must be rigid metal or flexible stiff-walled metal exhaust ducting. See exhaust
requirements on page 8.
SEE EXHAUST REQUIREMENTS
Pliers Cutting knife Nut drivers
Level Phillips Screwdriver Duct tape Crescent spanner
01 Installing your dryer
Control panel
Door
To Next Page
Loading...
