What to do if my Samsung DV8 T 2 Heat Pump items are not dried?
If your items are not drying, avoid overloading the dryer. Drying heavy fabrics separately from light fabrics can also help. Very small items may not get enough spinning inside the drum. You should also ensure that the filter and heat exchanger are clean. If a drain hose is connected, ensure proper water drainage.
What to do if my Samsung DV8 T 2 Heat Pump dryer does not warm up?
If your dryer isn't heating up, check the fuse or reset the circuit breaker. Inspect the lint filter and heat exchanger, and clean them if necessary. Also, the dryer may be in the cooling down process of the cycle.
Why is there a smell coming from my Samsung DV8 T 2 Heat Pump dryer?
The smell of paint, varnish, cleaning agents, and other household items could have circulated in the air and entered the dryer. Ventilate completely before using the dryer. If drying in an enclosed area, the dryer could cause the ambient temperature to rise, so open a window to ventilate the area. Avoid drying wet items left in the washing machine or dryer for a long time.
Why Samsung DV8 T 2 dryer does not start?
If your dryer isn't starting, first, ensure it's plugged in and the door is properly closed. Check the fuse or reset the circuit breaker. If you opened the door during a cycle, tap and hold again. Ensure the filter is clean and that Child Lock is not activated.
Why is my Samsung Heat Pump dryer too loud?
If your dryer is making excessive noise, check for coins, loose buttons, nails, and other objects and remove them. Also, inspect the lint filter for any stuck items. Make sure the dryer is level and standing firmly on the floor. A humming sound due to air moving through the drum and fan is normal.
Why Samsung DV8 T 2 Heat Pump items are not dried evenly?
Uneven drying can occur because seams, pockets, and other parts of clothing are harder to dry than others, which is normal. To improve evenness, sort heavy and light items separately.
What to do if the Samsung Heat Pump dryer turns off before the items are dry?
If the dryer stops before your items are dry, it might be due to a small load size. Try adding a few additional items like towels and try drying again.
To Next Page
General