Why is 5.1 channel sound not working on my Samsung DVD VCR Combo?
To get 5.1 channel sound on your Samsung DVD VCR Combo, ensure the following: the DVD-VCR player is connected to a compatible amplifier, the disc is recorded with 5.1 channel sound, the disc has the 'Dolby 5.1 ch' mark, and your audio system is properly connected and functioning.
What to do if disc does not play on Samsung DVD-CM500?
If your Samsung DVD VCR Combo disc does not play, make sure the disc is inserted correctly with the label side facing up. Also, verify the DVD's region code is compatible. This player is designed for DVDs and CDs, and cannot play CD-ROMs or DVD-ROMs.
Why is there no audio from my Samsung DVD VCR Combo?
If you're not getting any audio from your Samsung DVD VCR Combo, check the Audio Options Menu and ensure that you have selected the correct Digital Output setting.
How to reset forgotten password on Samsung DVD VCR Combo?
If you've forgotten your password for the Samsung DVD VCR Combo, start the unit with no disc inside. Then, simultaneously press the designated buttons on the front panel for five seconds. Turn the DVD-VCR off and on again using the STANDBY/ON button. The Parental Mode will be unlocked, and you can set a new rating level and password.
Why the screen ratio cannot be changed on Samsung DVD-CM500 DVD VCR Combo?
If the screen ratio on your Samsung DVD VCR Combo cannot be changed, it's because the screen ratio is fixed on the DVDs you are trying to play.
General| Brand | Samsung |
|---|---|
| Model | DVD-CM500 |
| Category | DVD VCR Combo |
| Language | English |
Details the buttons and indicators on the front panel of the DVD-VCR.
Lists and explains the various input and output connectors on the rear panel.
Details how to connect the DVD-VCR to a TV using a coaxial cable for signal reception.
Explains the process of connecting the DVD-VCR to a TV using a SCART cable for better quality.
Describes connecting via AV1 using Scart or RF coaxial cables to external devices.
Details connecting via AV2 using Scart or RF coaxial cables to external devices.
Explains how to set the internal clock and calendar for accurate recording and operation.
Describes how to change the text language displayed in the DVD-VCR menus.
How to choose the appropriate sound mode for your connected TV.
Adjusting the output channel to avoid interference or improve picture reception.
Illustrates connections using Component Jack and Super Jack (S-Video).
Marking specific scenes on a DVD for later recall.
Configuring the delay time for the center speaker based on distance.
Adjusting the delay time for surround speakers based on distance.
Visual guide and recommendations for positioning all speakers in a room.
Adjusting the volume balance between individual speakers.
Running a test tone to verify speaker installation and functionality.
Adjusting bass and treble levels for the audio output.
To Next Page