How to reset a forgotten password on a Samsung DVD Player?
If you've forgotten your password for the Samsung DVD Player, power on the unit without a disc inside. Then, press the ?? button on the front panel for five seconds. Turn the DVD-VCR off and on again using the STANDBY/ON button. The parental mode will now be unlocked, allowing you to set a new rating level and password.
Why won't my Samsung DVD Player play the disc?
If your Samsung DVD Player disc doesn't play, make sure that the disc is placed with the label side facing up. Also, verify the region code of the DVD to ensure it is compatible. Note that this DVD-VCR cannot play CD-ROMs or DVD-ROMs; use a DVD or CD instead.
How to troubleshoot a Samsung DVD Player that has no power?
If your Samsung DVD Player has no power, ensure that the power plug is properly connected to a wall outlet. Also, check if you have pressed the STANDBY/ON button to turn on the device.
Why is 5.1 channel sound not working on my Samsung DVD Player?
If you are not getting 5.1 channel sound on your Samsung DVD Player, ensure that: 1) The DVD-VCR is connected to a compatible amplifier. 2) The disc is recorded with 5.1 channel sound. Also, check the disc for the '5.1 ch' mark and verify that your audio system is properly connected and functioning.
Why is there no audio coming from my Samsung DVD Player?
If there is no audio from your Samsung DVD Player, make sure you have selected the correct Digital Output in the Audio Options Menu.
When should I clean the video heads on my Samsung DVD Player?
If poor pictures appear on a variety of cassettes on your Samsung DVD Player, the video heads may need cleaning.
What to do if you cannot see normal broadcasts on a Samsung DVD Player?
If you cannot see normal broadcasts on your Samsung DVD Player, check that the tuner or external setting is set to tuner. Also, verify the TV or VCR aerial connections.
Why did timer recording fail on my Samsung DVD Player?
If the timer recording was unsuccessful on your Samsung DVD Player, ensure that the STANDBY/ON button was pressed to activate the timer. Double-check the recording start and stop time settings. Keep in mind that a power failure or interruption during timer recording will cancel the recording.
What to do if the television programme was not recorded on my Samsung DVD Player?
If the television programme was not recorded on your Samsung DVD Player, check the DVD-VCR aerial connections. Ensure the DVD-VCR tuner is properly set. Also, verify that the safety tab on the cassette is intact.
How do I fix noise bars or streaks on playback with my Samsung DVD Player?
If you see noise bars or streaks during playback on your Samsung DVD Player, try pressing the TRK (? or ?) buttons to minimize this effect.
General| Progressive scan output | Yes |
|---|---|
| Audio formats supported | MP3, WMA |
| I/O ports | Antenna in Audio L/R out 2x SCART Component out RF in RF out A/V in A/V out |
| Dimensions (WxDxH) | 430 x 330 x 59 mm |
| Power requirements | 200-240V; 50Hz |
| Digital audio coaxial out | 1 |
| Device type | DVD player |
| Product color | Silver |
| Disc types supported | DVD+RW, DVD-R, DVD-RW |
| Number of optical discs | 1 discs |
| Power consumption (typical) | 19 W |
| Certification | CE, SEMKO |
Guide for connecting the DVD-VCR to a TV using an RF cable for signal reception.
Instructions for connecting the DVD-VCR to a TV via a SCART cable for better quality.
Explains connecting the DVD-VCR to satellite receivers or other devices using SCART or RF cables.
Guide for connecting the DVD-VCR to a TV using standard audio/video RCA cables.
Explains the automatic setup process when the DVD-VCR is first plugged in.
Steps to tune the TV when using an RF cable connection for the DVD-VCR.
How to manually set the DVD-VCR's internal clock and calendar.
Guide to automatically synchronize the DVD-VCR's clock with broadcast signals.
How to automatically scan and store available TV channels.
Details the automatic scanning and station storage process.
Step-by-step guide to manually tune and store TV stations.
Choose between SP and LP recording speeds for cassettes.
Steps to start recording a program immediately on the VCR.
Sets up recordings to stop automatically after a specified duration.
Schedules future recordings up to a month in advance.
How to review programmed recordings before they are made.
Instructions on how to remove scheduled VCR recordings.
Basic steps to play a pre-recorded VHS cassette.
Configures digital audio output settings like Dolby Digital and MPEG-2.
Adjusts screen aspect ratio, black level, and video output settings.
Restricts playback of DVDs based on their rating level.
Configures the parental control rating level for DVD playback.
Instructions for changing the parental control password.
Information and procedure for updating the DVD-VCR's firmware.
Adjusts the screen size and aspect ratio for optimal viewing.
How to play DivX and MPEG4 video files from discs.
To Next Page
