This document is a user manual for a Samsung dryer, covering models DVE(G)50A8800*, DVE(G)50A8600*, and DVE(G)45A6400*. It provides comprehensive information on installation, operation, maintenance, and troubleshooting.
Function Description
The Samsung dryer is designed to efficiently dry clothes and other fabric items. It offers various drying cycles and options to cater to different fabric types and user needs, including sensor-based drying and timed drying. The dryer can be connected to a home network via Wi-Fi for remote control and monitoring through the SmartThings app. It also features a vent blockage test to ensure optimal performance and safety.
Important Technical Specifications
- Capacity: 7.5 Cu.ft (front loading dryer)
- Water Pressure: 20-116 psi (137-800 kPa)
- Weight:
- DVE(G)50A8800*/DVE(G)50A8600*: 119.0 lb (54.0 kg)
- DVE(G)45A6400*: 114.6 lb (52.0 kg)
- Heater Rating:
- Electric: 5300 W
- Gas: 20000 BTU/hr
- Power Consumption: 5400 W
- Dimensions (Front Loading Dryer):
- Overall Height: 38.7 in (984 mm)
- Width: 27.0 in (686 mm)
- Depth: 31.3 in (794 mm)
- Depth with door open: 52.6 in (1335 mm)
- Electrical Requirements:
- Gas models: 120 volt, 60 Hz AC, 15-ampere fuse or circuit breaker.
- Electric models (U.S. only): Most require 120 / 240 volt, 60 Hz AC, 30-ampere fuse or circuit breaker. Some require 120 / 208 volt. Power cord sold separately for U.S. electric models.
- Electric models (Canada only): 120 / 240 volt, 60 Hz AC, 30-ampere fuse or circuit breaker. Power cord attached.
- Ducting Requirements: 4-inch (10.2 cm) diameter rigid aluminum or galvanized steel duct recommended. Maximum static pressure not to exceed 0.83 inches of water column. Flexible metal duct total length not to exceed 7'10½" (2.4 m) for U.S. only.
- Gas Requirements (Gas Models): Use natural or LP (liquid propane) gases. Must conform to local codes or national fuel gas code. LP conversion kit required for LP gas. Accessible manual gas shut-off valve required within 6" of the dryer.
Usage Features
- Control Panel: Features a Navigation dial, OK button, Start/Pause button, and options for Dryness, Temp., Time, and Options. A display shows current cycle, time remaining, and messages.
- Drying Cycles: Includes Normal, SuperSpeed, Small Load, Eco Normal, Heavy Duty, Towels, Activewear, Bedding, Shirts, Delicates, Wool, Denim, Perm Press, Steam Sanitize+, Steam Refresh, Wrinkle Away, Time Dry, Rack Dry, and Air Fluff.
- Dryness Levels: Adjustable from level 1 (gentle dry) to 5 (very dry, for large/thick items), depending on the selected cycle.
- Temperature Control: Adjustable in Time Dry cycle.
- Time Control: Set drying time between 10 and 90 minutes for Small Load, Time Dry, Rack Dry, Air Fluff, or Wrinkle Away.
- Options Menu: Access additional functions like Wrinkle Prevent, Damp Alert, AntiStatic, and Eco Dry.
- System Functions: Access by holding Options for 3 seconds. Includes AI Pattern (saves frequently used cycles), Alarm (enables/disables sounds), Wi-Fi (turns Wi-Fi on/off), Language, Vent Blockage Test, and Factory Reset.
- Smart Control/Smart Monitor: Remote control and monitoring via the SmartThings app (electric models: Smart Control, gas models: Smart Monitor). Requires Wi-Fi connection.
- Child Lock: Locks all buttons except Power and Options to prevent accidental operation.
- Drum Light: Can be turned on or off, and automatically illuminates when the door opens.
- Rack Dry: For items that need to be dried on a drying rack (applicable models only).
- Vent Blockage Test: Automatically detects duct status and reports blockages or problems, helping to reduce drying time and save energy.
Maintenance Features
- Lint Filter Cleaning: Must be cleaned before or after every load to prevent fire risk and maintain performance.
- Exhaust System Cleaning: Check and clean the exhaust system regularly (annually recommended) to ensure proper airflow and optimum performance. The external exhaust hood must be cleaned frequently.
- Dryer Exterior Cleaning: Clean with a soft, damp cloth. Avoid abrasive substances and sharp objects to prevent scratches.
- Drum Cleaning: Remove stains with an all-purpose cleaner. Tumble old towels or rags to remove residue. For powder-coated drums, use a mild, non-abrasive cleaner.
- Vent Sensor: Detects and notifies when ductwork needs cleaning.
- Troubleshooting Guide: Provides checkpoints and information codes with suggested actions for common problems.
Need help?
To Next Page
General