Samsung DVG50M7450W Series

Questions and Answers

J
judyadamsAug 14, 2025
Why Samsung Dryer does not dry clothes properly?
- A
  Amber MartinezAug 15, 2025
  If your Samsung dryer isn't drying clothes effectively, several factors could be the cause. Ensure the exhaust hood outside your home can open and close freely and check the exhaust system for any lint buildup; ducting should be inspected and cleaned annually, and a 4” rigid metal exhaust duct should be used. Avoid overloading the dryer—one wash load should equal one dryer load. Separate heavy and lightweight items, and for large, bulky items like blankets, reposition them for even drying. Also, ensure your washer is properly draining water from the load, and if the load is too small, add a few towels. Conversely, if the load is too large, remove some items. Finally, clean the lint filter.
H
Heidi Taylor MDAug 18, 2025
Why Samsung Dryer does not heat up?
- C
  christinagentryAug 18, 2025
  If your Samsung dryer isn't heating, start by checking your home’s circuit breakers or fuses. Remember that some cycles don't require heat, so double-check your selected cycle. If you have a gas dryer, ensure the gas supply is turned on. Also, clean both the lint filter and the exhaust duct. Finally, the dryer might simply be in the cool-down phase of its cycle.
K
kennethfryAug 21, 2025
How to stop Samsung DVG50M7450W Dryer from being so noisy?
- S
  Sandra LewisAug 21, 2025
  If your Samsung dryer is making excessive noise, check the drum for objects like coins, loose buttons, or nails, and remove them. It's normal to hear the gas valve or heating element cycle on and off. Ensure the dryer is properly leveled according to the installation instructions. A humming sound can also be normal due to air moving through the drum, fan, or exhaust system.
E
Elizabeth ThomasAug 25, 2025
What to do if Samsung DVG50M7450W leaves lint on clothes?
- V
  Veronica LyonsAug 25, 2025
  To minimize lint on clothes from your Samsung dryer, ensure the lint filter is cleaned before every load, and during the cycle for clothes that produce a lot of lint. Separate lint-producing fabrics (like cotton towels) from lint-trapping fabrics (like linen pants). Divide larger loads into smaller ones, check pockets before drying, and remove any lint inside the drum before drying.
S
sharoncherryAug 28, 2025
Why Samsung DVG50M7450W dries unevenly?
- C
  Christy MorenoAug 28, 2025
  Uneven drying in your Samsung dryer can occur because seams, pockets, and heavy areas may not dry completely with the rest of the load. This is normal. Also, drying a single heavy item with lightweight items can cause uneven results. For best results, dry heavy and lightweight items separately.
J
Joseph ThomasAug 31, 2025
Why Samsung DVG50M7450W Dryer has odors?
- J
  Justin SandersAug 31, 2025
  If your Samsung dryer has unpleasant odors, it could be due to household odors from paint, varnish, or strong cleaners entering with the surrounding air. Ventilate the room completely before using the dryer. You can also use a cycle with the Refresh function, and if odors persist, wash and dry the item again.
J
Jenna HoffmanSep 3, 2025
Why are items still wrinkled after using WRINKLE PREVENT on my Samsung DVG50M7450W?
- D
  David HendersonSep 3, 2025
  For best results with the WRINKLE PREVENT feature on your Samsung dryer, use small loads of 1 to 4 items and load similar types of items together. Also, be sure to remove the items immediately after the drying cycle is complete.
M
Madison ThomasSep 7, 2025
Why is sprayed water not visible during STEAM CARE in Samsung Dryer?
- J
  Justin HermanSep 7, 2025
  Sprayed water is difficult to see when the door is closed during the STEAM CARE cycle of your Samsung dryer.
Z
Zachary WilliamsSep 10, 2025
Why does water drip from the nozzle when STEAM CARE starts in Samsung DVG50M7450W?
- J
  Justin McleanSep 10, 2025
  The water dripping from the nozzle at the start of the STEAM CARE cycle in your Samsung dryer is due to steam condensation and will stop shortly.

Summary

Safety Information

What you need to know about the safety instructions

Important safety precautions

Essential safety measures to mitigate risks of fire, electric shock, and personal injury during dryer operation.

Installation Requirements

Key installation requirements

Essential prerequisites for dryer installation, covering electrical outlets, power cords, gas lines, and exhaust systems.

Location considerations

Ducting requirements

Specifications for dryer ducting, including recommended materials, lengths, and elbow limitations for efficient air exhaust.

Exhausting requirements

Mandatory guidelines for venting the dryer exhaust outdoors to prevent lint buildup and ensure safety.

Gas requirements

Detailed requirements for gas dryers, including gas type, connection standards, safety valves, and installation codes.

Electrical requirements

Specifications for electrical connections, grounding, wiring, and service requirements for safe and proper dryer operation.

Installation

Step-by-step installation

Comprehensive guide detailing the sequence for installing the exhaust, gas, electrical, and water connections.

Vent blockage test

Exhaust ducting guide

Operations

Feature panel

Troubleshooting

Checkpoints

Diagnostic guide for common dryer issues, offering actions to resolve problems like no operation, no heat, or poor drying.

Information codes

Explanation of error codes displayed on the panel and troubleshooting steps to resolve specific operational issues.

Warranty (U.S.A)

Warranty (CANADA)

Samsung DVG50M7450W Series Specifications

General

Color	white
Dryer Capactity	7.4 cubic feet
Number of Cycles	11
Cycle Selections	steam refresh, towels, delicates, normal, wrinkle away, permanent press, time dry, steam sanitize, heavy duty, bedding, quick dry
Options	wrinkle prevent, adjust time (up), adjust time (down), child lock, eco dry, smart care, drum light
Stackable	no
Venting	no
Temperature Settings	4
Temperature Selections	high, medium, low, extra low
Temperature Control	yes
Child Lock	yes
Cycle Signal	yes
Interior Light	yes
Moisture Sensor Option	yes
Steam	yes
Smart Home	no
Voltage	120 volts