Installation
Installation
English10
STEP 2 To replace the rear foot
If the distance between the oor and the bottom of the worktop is more than 860 mm,
replace the rear foot with the sub foot provided before starting installation.
1. Lay the dishwasher on its back.
CAUTION
Do not lay down the dishwasher to a side.
Water may leak.
2. Locate the rear foot at the rear bottom
of the dishwasher.
3. Turn the Torx T20 screwdriver counter
clockwise as shown to remove the rear
foot.
DW9000M_DD68-00193B-02_EN.indd 10 2018-04-10 12:58:51
To Next Page
Loading...
