Installation
Installation
English14
STEP 6 Install the custom panel (SBI/FBI models only)
SBI (Semi Built-In, DW60M9***S*) models
A
1. Insert the supplied rubber skirt (A) into
the 3 holes at the bottom of the door.
(applicable models only)
NOTE
If the rubber skirt is wider than the
dishwasher, cut the skirt to match the
width of the dishwasher.
A
B
2. Select to align the custom panel to
either the top or bottom edge of the
cabinets.
A. To align the custom panel to the top
edge of a cabinet.
B. To align the custom panel to the
bottom edge of a cabinet.
CAUTION
Note that installation method differs for A
and B.
DW9000M_DD68-00193B-02_EN.indd 14 2018-04-10 12:58:52
To Next Page
Loading...
