Samsung DW60M9970 Series - Page 16

Installation
Installation
English16
SBI (Semi Built-In, DW60M9***S*) models
B
A
6. Put the installation template on the
back of the custom panel.
• For A: Align the marks on the
installation template to the top edge of
the custom panel.
• For B: Align the marks on the
installation template to the bottom edge
of the custom panel.
7. Use transparent tape to temporarily x
the installation template to the custom
panel.
8. On the custom panel, mark the location
of the 6 screw holes according to the
installation template.
NOTE
The rear of the custom panel will be
attached to the dishwasher door.
CAUTION
Use a custom panel between 2.5 kg and
8 kg.
B
C
B
C
9. Remove the installation template and
tighten the custom panel xers (B) near
the bottom with 2 screws (C, Ø4 X 16)
as shown.
DW9000M_DD68-00193B-02_EN.indd 16 2018-04-10  12:58:52