Setting up your dishwasher
Meeting installation requirements
Electrical supply and grounding
To prevent the risk of fire, electric shock, or personal injury, all wiring and grounding
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70
Latest Revision and local codes and ordinances. It is the personal responsibility of the
appliance owner to provide adequate electrical service for this appliance.
CAUTION
• Never use an extension cord.
• When preparing for installation, ensure that you provide:
- An individual branch circuit with a 120 V, 60 Hz, 15 AMP fuse or circuit breaker that
serves only your dishwasher .
• Your dishwasher must be grounded. If your dishwasher malfunctions or breaks down,
grounding will reduce the risk of electric shock by providing a path of least resistance
for the electric current.
WARNING
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
English10
Setting up your dishwasher
DW60R2014(A5)_IB_DD81-02706A-00_EN.indd 10 12/24/2018 12:15:55 PM
To Next Page
Loading...
