Samsung DW60R2014 - Control Panel

Setting up your dishwasher
Control panel
The Control Panel section has instructions for the DW60R2014US and the DW60R201AP.
Instructions for the DW60R2014US start below. Instructions for the DW60R2014AP start
on page 14.
DW60R2014US
01
04
03
02 06
07
08
09
05
01 POWER
When you press the POWER button, the entire display turns on and
off. When the selected cycle is complete, the dishwasher powers
off automatically.
02 Cycles To select a wash cycle, press this button.
03 Half Load
For small loads, use either the upper or lower rack only to save
energy. Press the Half Load button to select the upper or lower
basket.
04 Delay Start
Delay a cycle for up to 24 hours in one-hour increments. The hour
displayed indicates the time at which the wash will be started.
05 Display Window
Displays the running time, Delay start hours, and information
codes. If a problem occurs during operation, a check message will
be displayed with a warning sound.
06 Sanitize
The temperature rises to 158 ˚F (70 ˚C) in the nal rinse cycle for
high temperature sanitization. If you select the Sanitize option,
the “Sanitize” lamp blinks when the water temperature reaches
the sanitary temperature [over 156 ˚F (69 ˚C)], and then remains
illuminated until the Sanitize option ends. When you press the
POWER button, the “Sanitize” lamp turns off.
NOTE
• The Normal cycle with the Sanitize option selected is NSF
certied.
• The Sanitize feature operates in accordance with NSF/ANSI
Standard 184 for residential dishwashers. Certied residential
dishwashers are not intended for licensed food establishments.
English12
Setting up your dishwasher
DW60R2014(A5)_IB_DD81-02706A-00_EN.indd 12 12/24/2018 12:15:56 PM