Samsung DW80H9970US - User Manual

Questions and Answers

A
ashleybarnesAug 17, 2025
Why won't my Samsung Dishwasher start?
- L
  Lisa ReeseAug 17, 2025
  Your Samsung Dishwasher might not start due to several reasons: * The door may not be completely closed. Ensure it is properly latched. * A cycle might not be selected. Choose an appropriate cycle. * The power cable could be disconnected. Make sure it's properly connected. * The water supply might be off. Check if the water supply valve is open. * The control panel could be locked. Unlock the child lock. * A circuit breaker might be open. Try resetting the circuit breaker.
R
rodriguezcassandraAug 20, 2025
Why does my Samsung DW80H9970US Dishwasher not dry dishes well?
- T
  tammyramirezAug 20, 2025
  If your Samsung Dishwasher isn't drying dishes effectively: * Ensure there is rinse aid in the dispenser; use a liquid type rinse aid. * The water temperature might be low. Connect the water supply line to a hot water supply and use rinse aid with the Sanitize option. * Too many dishes may have been loaded. Ensure proper loading of items. * Glasses and cups with concave bottoms may be holding water. After the cycle, empty the lower rack first to prevent water from dripping onto the dishes in the lower rack.
M
Michael NolanAug 23, 2025
Why is my Samsung Dishwasher too noisy?
- D
  daisy54Aug 23, 2025
  Your Samsung Dishwasher might be noisy for several reasons: * Sound is normally generated when the dispenser cover is open and the drain pump is operating in an early stage. * The dishwasher may not be level. Ensure the dishwasher is level. * There might be a ‘chopping’ sound because a nozzle is bumping against the dishes. Rearrange the dishes.
N
Natasha ZimmermanAug 28, 2025
Why Samsung DW80H9970US Dishwasher leaves glasses with a light film?
- R
  reneeellisAug 28, 2025
  If your Samsung Dishwasher leaves a light film on glasses: * The water supplied may be soft, and too much detergent was used. Try underloading the dishwasher and using a rinse aid to minimize this. * Aluminum dishes may have been included in the wash load. Remove the marks on the dishes using a low sensitivity cleaner.
S
Steven LewisAug 31, 2025
Why does my Samsung DW80H9970US Dishwasher leave a yellow or brown film inside?
- W
  walkerjeffreyAug 31, 2025
  A yellow or brown film inside your Samsung Dishwasher is likely caused by coffee and tea soils. Remove the soils using a spot cleaner.
J
Jeffrey HenrySep 2, 2025
How to get rid of bad odor in Samsung DW80H9970US Dishwasher?
- M
  Mr. Matthew HannaSep 3, 2025
  To eliminate bad odors from your Samsung Dishwasher: * If water was left over from an incomplete cycle, insert detergent without loading dishes, and run the Normal cycle to clean the dishwasher. * If the dishwasher is not used daily, or soiled dishes are left in the unit too long, place a glass with 8 ounces of vinegar upright into the lower rack with the dishwasher empty and no detergent, and then run a Normal cycle.
D
Dominique NealSep 5, 2025
Why is my Samsung Dishwasher taking too long?
- M
  Martin PaceSep 5, 2025
  If your Samsung Dishwasher is taking too long, it might be due to cold water being supplied. Check if the water supply line is connected to a hot water supply, as additional time is required to heat cold water.
D
Dr. Rebecca GreenSep 8, 2025
Why Samsung DW80H9970US Dishwasher does not have a smoothly rotating nozzle?
- R
  Robert WashingtonSep 8, 2025
  If the nozzle in your Samsung Dishwasher isn't rotating smoothly: * The nozzle hole may be clogged with food particles. Clean the nozzle hole. * The nozzle might be blocked by a dish or pot. After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the dishes interfere with them.
L
Leslie Friedman MDSep 12, 2025
What to do if Samsung DW80H9970US has a bent upper rack after loading dishes?
- S
  Steven SampsonSep 12, 2025
  If the upper rack of your Samsung Dishwasher bends after loading dishes, it indicates that the dishes are not loaded properly. Load your dishes as recommended.
K
Keith SanchezSep 13, 2025
What does Temperature Sensor error mean on Samsung DW80H9970US Dishwasher?
- R
  Richard JohnsonSep 13, 2025
  If your Samsung Dishwasher displays a Temperature Sensor error, it indicates a functional error. With the dishwasher empty, add detergent, and then run a cycle.

Summary

Safety Information

Important Safety Instructions

Explains icons and safety practices for safe operation.

Before Using Your Dishwasher

Provides crucial warnings and precautions before the first use.

Setting Up Your Dishwasher

Unpacking Your Dishwasher

Meeting Installation Requirements

Details essential electrical, water, and flooring requirements for proper installation.

Using Your Dishwasher

Control Panel

Overview and function of buttons and indicators on the dishwasher's control panel.

Cycle Selector

Basic Guidelines

Step-by-step instructions for operating the dishwasher.

Do Not Wash the Following Items

Loading the Lower Rack

Loading the Upper Rack

Using the Cutlery Basket

Using Detergent

Instructions on how to fill and use detergent for optimal cleaning performance.

Using Rinse Aid

Explains how to fill and use rinse aid for improved drying.

Cleaning and Maintaining Your Dishwasher

Cleaning the Nozzles

Cleaning the Filter

Cycles

Troubleshooting

Check These Points If Your Dishwasher...

Common issues and solutions for dishwasher operation problems.

Information Codes

Appendix

Warranty

Samsung DW80H9970US Specifications

General

Style	built-in dishwashers
Color	stainless steel
Cycle Selections	auto, normal, heavy, delicate, express 50, self clean
Options/Settings	zone booster, speed booster, sanitize, delay start
Delay Start	yes
Child Lock	yes
Load Sensor	yes
Number of Racks	3
Cycle Signal	yes
Water Filter	yes
Food Disposer	no
Sanitize Settings	yes
Annual Energy Consumption	258 kilowatt hours
Voltage	120 volts
Current	15 amperes