Samsung ED40D - MDC Program Installation;Uninstallation; Installation; Uninstallation

41
MDC Program Installation/Uninstallation
Installation
1
Click the MDC Unified installation program.
2
Select a language for installation. Next, click "OK".
3
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
4
In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next".
5
In the displayed "Customer Information" window, fill out all the information fields and click "Next".
6
In the displayed "Destination Folder" window, select the directory path you want to install the program in and click "Next".
7
In the displayed "Ready to Install the Program" window, check the directory path to install the program in and click "Install".
8
Installation progress will be displayed.
9
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
10
The MDC Unified shortcut icon will be created on the desktop after installation.
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
MDC installation can be affected by the
graphics card, mother board and network
conditions.
If the directory path is not specified, the
program will be installed in the default
directory path.
Select "Launch MDC Unified" and
click "Finish" to run the MDC program
immediately.
-
The MDC execution icon may not be
displayed depending on the PC system
or product specifications.
-
Press F5 if the execution icon is not
displayed.
For details on how to use the MDC
program, refer to Help after installing the
program. The MDC program is available on
the website.