Samsung ERV - Page 10

ENGLISH-10
Installing the ERV wired remote controller
Group control with your ERV wired remote controller
Group control means that you are using one ERV wired remote controller to control two or more ERVs at the
same time.
1. Using one ERV wired remote controller to control three ERVs.
ERV wired remote
controller
COM2(F3, F4) COM2(F3, F4)
ERV ERV ERV
2. Using one ERV wired remote controller to control ERVs connected to other ERV repeaters in
a group.
CN4
CN3
RED
CN2
BLK
CN4
CN3
RED
CN2
BLK
ERV interface module (MIM-N10)
ERV
ERV
ERV wired
remote
controller
ERV interface module
(MIM-N10)
COM1(F1, F2)
COM2(F3, F4)
COM1(F1, F2)
COM2(F3, F4)
• Regardless of the setting of group address (RMC address), only the ERVs connected to COM2
communication wire are controlled in a group.
• You can control the maximum of 16 ERVs as a group.
• When ERVs of other ERV repeaters are controlled in a group, address of each ERV must be set
dierently.
Caution
ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 10 2016-12-23 오후 6:02:54