ENGLISH-12
Installing the ERV wired remote controller
Initializing the ERV wired remote controller communication
ERV wired remote controller must be initialized if installation status changes.
When the number of ERVs/indoor units or their address is changed
Press the Fan speed and
buttons at the same time for more than ve seconds.
Your ERV wired remote controller is initialized, and the device searches for the indoor units/ERVs
connected to your ERV wired remote controller again.
ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 12 2016-12-23 오후 6:02:54
To Next Page
Loading...
