ENGLISH-14
Installing the ERV wired remote controller
Error codes of ERV wired remote controller
Indication Description
• Tracking between ERV wired remote controller and ERV is not completed within 3
minutes.
• Indoor unit is not installed when external interlock function is executed.
• The maximum number of installation is exceeded. (Maximum:16)
• Reset is required after checking the number of installed devices.
• Error on installation of slave ERV wired remote controller (When more than 2 slave ERV
wired remote controllers are installed.)
• Communication error between master ERV wired remote controller and slave ERV wired
remote controller
• Communication error between ERV wired remote controller and ERV/indoor units (After
completing the tracking of ERV wired remote controller, communication does not work
for 3 minutes.)
• EEPROM error
• Refer to the installation manual of each device for error codes of ERVs.
Caution
ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 14 2016-12-23 오후 6:02:55
To Next Page
Loading...
