ENGLISH-8
Installing the ERV wired remote controller
Tracking ERVs from the ERV wired remote controller
Displays the total number of units searched
Displays tracking function
1. Tracking of your ERV wired remote controller automatically starts when you turn on the
power after installation.
2. If you want to perform tracking again after installation, press the Fan speed and
buttons at the same time for more than ve seconds.
ū The system is reset, and tracking starts again.
3. During the tracking, the total number of currently searched products is displayed.
4. It may take about 5 minutes at initial installation or when you re-set the master setting.
• If you want to perform system reset of ERV wired remote controller, press the Fan speed and
buttons at the same time for more than ve seconds.
Caution
ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 8 2016-12-23 오후 6:02:53
To Next Page
Loading...
