057
Settings ( )
You can turn on and off the Auto Focus lamp.
- Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On]*
: The AF lamp will light up in low
light conditions.
Auto Focus lamp
The Video output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device
(monitor or TV, etc.) to which the camera is connected. PAL
mode can support only BDGHI.
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor.
Selecting Video out type
Yellow - Video
White - Sound
Back Set
Auto Power Off :3 min
AF Lamp
Video Out :NTSC
USB :Auto
Imprint :Off
Off
On
Back Set
Auto Power Off :3 min
AF Lamp :On
Video Out :NTSC
USB :Auto
Imprint :Off
NTSC
PAL
To Next Page
Loading...
