Samsung Galaxy Note9 - Charging the Device; Power and Initial Setup

44
Getting ready Getting ready
Removing a microSD memory card
a
Insert the tip of the SIM card removal tool
(sample) into the au IC card/microSD memory
card tray eject hole in a straight line
The au IC card/microSD memory card tray will slightly eject.
• Not inserting the tool in a straight line might result in
damage or a fault.
b
Pull out the au IC card/microSD memory card
tray in a straight line
• If you turn the au IC card/microSD memory card tray
upside down, the au IC card or the microSD memory card
may be falled.
c
Remove the microSD memory card from the au
IC card/microSD memory card tray
d
Insert the au IC card/microSD memory card
tray in a straight line all the way into the au IC
card/microSD memory card slot as shown in the
diagram
◎ After using this product for a long time, the removed microSD
memory card may be warm; this is normal.
Charging
When you purchase your product, the internal battery is not
fully charged. Be sure to charge the internal battery before
use.
■ Plugging USB Type-C plug
When charging with TypeC Common AC Adapter 02 (sold
separately)
Please insert straight in the external connection terminal of
the product as shown in the gure below.
USBType-C
plug
Failure to do so may cause signicant damage to the
product. Damage from incorrect connection is out of
compensation.