Samsung Galaxy Prevail LTE - Bluetooth Tethering Setup

Settings 294
To connect using a Personal Identification Number (PIN):
1. From Wi-Fi settings, tap More options > WPS PIN entry.
2. Enter the PIN displayed on your router.
3. Follow the prompts to complete the connection.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
● Enable Notification When Open Networks Are Available: From Wi-Fi settings, tap More
options > Advanced > Network notification.
 The setting is available when Wi-Fi is turned on.
 Tap Network notification to turn the option on or off.
● Set Timing for Pausing a Connection: From Wi-Fi settings, tap More options > Advanced
> Keep Wi-Fi on during sleep and then select a setting.
● Allow Background Scanning for Wi-Fi Networks (Even When Wi-Fi Is Turned Off): From Wi-
Fi settings, tap More options > Advanced > Always allow scanning to turn the option on or
off.
● Switch between Wi-Fi and Cellular Service to Maintain a Stable Internet Connection: From
Wi-Fi settings, tap More options > Advanced > Smart network switch to turn the option on
or off.
● Install Network Security Certificates: From Wi-Fi settings, tap More options > Advanced >
Install certificates and select a certificate.
● Check MAC Address: From Wi-Fi settings, tap More options > Advanced.
 MAC Address appears below “MAC Address.”
● Check IP Address: From Wi-Fi settings, tap More options > Advanced.
 IP Address appears below “IP Address.”