Connections
More networks Mobile networks.
Default Setup Options AT&T MicroCell
Your phone default is set to Automatic, which causes your
phone to automatically search for an available network.
To search for an AT&T MicroCell:
1. From the Settings screen, touch
Connections
Connections
To select a network each time you connect, set this opti
on to
Manual:
More networks Mobile networks.
Connections
2. Touch Network operators Search for
1. From the Settings screen, touch
AT&T MicroCell.
Your AT&T MicroCell must be installed and activated
2. Touch Network operators.
before you can connect to it. For more information, visit
att.com/esupport.
3. Touch Default setup.
4. Touch Manual to locate and connect to a network
manually or touch Automatic to allow the device to
automatically select a network.
Settings 158
To Next Page
Loading...
