Entering Text Using Swype
Swype is a text input method that makes it possible to enter
a word by sliding your finger or stylus from letter to letter,
lifting your finger between words. Swype uses error
correcting algorithms and a language model to predict the
next word. Swype also includes a touch predictive text
system.
Enabling and Configuring Swype
To enable the Swype keyboard while entering text:
1. Touch the top of the screen and swipe downward, to
display the Notification Panel.
The Notification Panel displays.
2. Touch Choose input method.
The Choose input method pop-up displays.
3. Touch Swype.
The Swype keyboard displays.
Swype Tips
The following example shows how to enter the word “This”.
Put your finger down on the “T”, and without lifting, glide it
to the “h”, then to the “i” then over to the “s”.
41
To Next Page
Loading...
