210
7. To capture an image from the video while recording, tap .
This feature is not available while the anti-shake feature is
activated.
8. Tap the Stop key ( ) to stop the recording and save the
video file to your Camera folder.
ā or ā
Tap the Pause key ( ) to pause the recording.
9. Once the file has been saved, tap the image viewer, then tap
(
Play
) to playback your video for review.
10. Press to return to the viewer.
Camcorder Options
You can change options using your keypad in capture mode. The
following short cuts are available:
Self portrait
: allows you to activate the front facing camera
so you can take videos of yourself or video chat.
Flash
: allows you to set the flash options to Off or On.
When you set the flash to On, it stays on continually while
you are taking a video.
Recording mode
: allows you to set the recording mode to:
Normal, which is limited only by available space on the
destination location, Limit for MMS, which is limited by
MMS size restrictions.
To Next Page
Loading...
