Changing Your Settings 395
• Enable traces
: Enables/disables on-screen tracing based on an
available parameter.
• Do not keep activities
: Destroys every activity as soon as the
application is closed.
• Limit background processes
: Sets the number of processes that can
run in the background.
•Show all ANRs
: Displays a prompt when applications running in the
background are not responding.
USB Debugging
When enabled, allows debugging when the device is attached to a
PC by a USB cable.
1. From the main
Settings
page, tap
Developer options
.
2. Tap
USB debugging
to enable or disable the setting. When
enabled, a check mark appears in the check box.
Allowing Mock Locations
Note:
This feature is used for development purposes only.
If you are a developer who is testing a GPS applications using this
device, you can tell the device that the phone is at different GPS
locations. In other words, the phone is allowed to “mock” the
coordinates.
1. From the main
Settings
page, tap
Developer options
.
2. Verify the
Developer options
are active.
3. Tap
Allow mock locations
to enable or disable the setting.
When enabled, a check mark appears in the check box.
To Next Page
Loading...
